Problems — Ft-757gx

This is often a cascade failure: Leaky capacitors in the ALC or protection circuit cause a transistor to stay fully on, drawing excess current through a low-wattage resistor. On the FT-757GX, R1084 (10 ohm, 1/4W) on the Regulator Unit is notorious for burning when C1085 shorts.

Note: Working on internal transceivers involves high voltages and static-sensitive components. This article is for informational purposes; always consult a professional technician if unsure. The Yaesu FT-757GX, produced in the mid-1980s, remains a popular entry-level HF transceiver due to its compact size, relatively simple operation, and 100W output. However, age has caught up with this veteran. Electrolytic capacitor plague, brittle solder joints, and proprietary modules make troubleshooting a unique challenge. ft-757gx problems

Buy only if you can test full receive sensitivity on all bands and full 100W output into a dummy load. If it works, budget $50–100 for a recap and relay replacement, and it will likely last another decade. This is often a cascade failure: Leaky capacitors

Below are the most frequently reported problems with the FT-757GX series, ranked by occurrence. Symptoms: The S-meter stays low or zero, even on strong signals. Background noise is faint or absent. This article is for informational purposes; always consult