Ma112 Usb To Uart Bridge Driver ❲Desktop❳

1. Introduction In the ecosystem of embedded systems, IoT development, and legacy hardware interfacing, the USB-to-UART bridge is an indispensable tool. Among the myriad of chips from Silicon Labs (CP210x), FTDI (FT232), and Prolific (PL2303), the MA112 occupies a specific niche. Often found on low-cost development boards, GPS modules, and industrial sensor interfaces, the MA112 is a highly integrated bridge chip designed for simplicity and cross-platform compatibility.

sudo usermod -a -G dialout $USER # Log out and back in ma112 usb to uart bridge driver

./ma112_eeprom --vid=0x1234 --pid=0x5678 --serial=ABC123 Warning : Changing VID/PID breaks driver matching unless you update the .inf file accordingly. The MA112 driver supports arbitrary divisors. On Linux, use setserial : Often found on low-cost development boards, GPS modules,

sudo modprobe usbserial vendor=0x1a86 product=0x7523 # Example VID/PID # Or use the dedicated module: sudo modprobe ch341 Add your user to the dialout group: On Linux, use setserial : sudo modprobe usbserial